Do not spray Wet & Forget directly onto plants. Protect landscaping from overspray by rinsing with water before and after application or covering them during application. … Wet & Forget has an unlimited shelf life. It’s bleach-free and non-acidic.

How long does it take for wet and forget to work?

How long will Wet & Forget Outdoor take to work? It depends on the type of growth and the intensity of the contamination. If it’s a new growth or a small amount of staining you can see results within days. Otherwise, it may take 2-3 months to see improvement.

Can you scrub wet forget?

Wet & Forget works with the rain and the wind to remove stubborn growths, so you don’t have to go back and do any scrubbing! The days of pressure washing and hand scrubbing surfaces are gone, thanks to Wet & Forget Outdoor Cleaner.

How often should you use wet and forget?

Spray your shower down with Wet & Forget Shower after you use the shower. The next day, simply rinse the surfaces clean with water before showering. Do this once each week to keep your shower spotless. For best results leave on surface 8-12 hours (but no more than 24 hours).

Can I use wet and forget on my car?

Motor Vehicles Wet & Forget Outdoor safely removes algae and moss from your vehicle’s exterior surfaces, including: Exterior paint. Metal.

How do you apply wet and forget on concrete?

  1. Mix 1 part Wet & Forget with 5 parts water in a pump-up garden sprayer.
  2. Spray the affected concrete with the diluted Wet & Forget solution.
  3. Allow at least 4 to 5 hours of drying time before the chance of rain.
  4. Walk away, and let Wet & Forget Outdoor do the work for you!

Can you use wet and forget on outdoor rugs?

Wet & Forget is safe to use on all types of outdoor furniture, rugs, and umbrellas. Just remove the cushions and keep people off the furniture surfaces during the application and overnight. The next day, rinse the furniture off with water before anyone sits on the surface.

Does Wet and Forget work on roof tiles?

Roof cleaning can be made easier with a once a year, no-fuss application of Wet & Forget Xtreme Reach™ Hose End. This outdoor cleaner is safe to use on virtually any type of roof and will help to keep your roof free of moss, mold, mildew, and algae all year long. To find a Wet & Forget retailer near you, click here.

How do you use a wet and forget on a patio?

Mix one part of Wet & Forget with five parts of water in a garden sprayer. Soak your patio thoroughly with the solution and let it dry for four to five hours – during that time, Wet & Forget starts to get on with the job of cleaning your patio, leaving you free to enjoy the nice weather. And that’s it!

Is Wet and Forget safe on grout?

Wet & Forget Shower lets you break free from scrubbing your grout. Its gentle formula targets soap scum, grime, body oils, and mold and mildew stains without bleaching your shower curtain or damaging your fixtures.

Article first time published on

Does Wet and Forget smell?

“One aspect of Wet & Forget Indoor that I really admire is the fact that it does not contain bleach or other really harsh chemicals. I like that I was able to use Wet & Forget Indoor without coughing profusely or having to get a mask. There were no fumes, and the smell was very mild.

Can you use Wet & Forget on glass shower doors?

Wet & Forget Shower will clean and prevent the buildup of soap scum, shower grime, and body oils on your shower doors. It will also clean up both mold and mildew stains on your shower glass doors.

Does Wet and Forget harm grass?

When Brett was asked what this means for the consumer, he replied, “Because Wet & Forget has a pH of 8, it is non caustic and non acidic, making it safe for application on any exterior surface.” Wet & Forget is easy on the environment. It won’t leach into the soil and kill plants.

Is Wet and Forget safe for stucco?

container covers up to 2,000 square feet. The Fan Tip quickly covers large surface areas such as your siding, deck, or driveway in minutes. Apply Wet & Forget Outdoor Xtreme Reach™ Hose End when you need to clean: … Second story or hard-to-reach composite or vinyl siding, stucco, metal guttering, etc.

Is wet and forget just bleach?

Wet & Forget is non-acidic and contains no bleach; therefore it can be used on ANY outdoor surface material. Some of the more popular surfaces include: Roofs, Siding, Decks, Walkways, Driveways, Brick, RVs, and Boats.

Does wet and forget work on brick pavers?

Wet & Forget Outdoor annihilates green algae on your pavers with no elbow grease required and keeps it from coming back for a year or more in most cases. The choice is simple! To zap green algae: Mix 1 part Wet & Forget Outdoor with 5 parts water in a pump-up garden sprayer.

How do I keep my concrete from mildewing?

Keep the concrete patio clean at all times. Mold needs food to live, so removing any dirt or debris helps restrict its growth. Clean the patio as needed with a solution of 1/2 cup detergent per gallon of water, using a scrub broom.

Why does concrete turn black?

Calcium chloride in concrete is a primary cause of concrete discoloration. … The resulting low water-cement ratio affects the hydration of the cement ferrites, which contributes to a darker color. Concrete surfaces that are troweled too early will increase the water-cement ratio at the surface and lighten the color.

How do you keep algae from growing on concrete?

  1. Proper Design for Water Control to Prevent Algae and Fungus Growth. …
  2. Good Workmanship Helps with Algae Control. …
  3. Microban® Antifungal and Anti Algae Technology. …
  4. Maintenance to Prevent Algae and Fungus Growth.

Should I pressure wash before wet and forget?

Thoroughly saturate the surface with Wet & Forget on a cool, dry day. Late in the day is best. Leave the growth to start decomposing for 2–3 weeks (the longer the better!) then prior to painting or staining, gently pressure wash the surface – growth, dirt and residue will come off faster and easier.

Can Wet and Forget be used on wood?

Simply dilute Wet & Forget Outdoor 5 parts water and 1 part Wet & Forget in a pump-up garden spray. For a large deck, connect the Wet & Forget Xtreme Reach™ Hose End product to your garden hose and attach the fan tip to apply to the entire deck in minutes. Then spray the wood deck. That’s it!

What is the main ingredient in wet and forget?

Wet & Forget® Products The active ingredient is Alkyl dimethyl benzyl ammonium chloride, which is 9.9% of the product. This ingredient is also known as Benzalkonium chloride, and it is one of the active ingredients in Clorox wipes.

Can you use wet and forget shower on tile and grout?

Wet & Forget Shower will remove soap scum and everyday surface dirt from tile grout and will remove surface mold and mildew stains. However, mold and mildew stains can become embedded in the grout.

What do you spray in shower after every use?

Fill a spray bottle with equal parts vinegar and water, and you should have enough to last at least a couple of weeks. Spray down the shower after each time you use it, and the homemade shower cleaner will combat odors and prevent the growth of bacteria and the buildup of grime.

Can you use wet and forget on cushions?

Wet and Forget is a slow working product so if you want your awning cleaned with instant results, you may do better with an actual cleaner. The label also states that it shouldn’t be used on cushions so if your Sunbrella fabric is on a cushion, don’t use it.

Can you use wet and forget on marble?

Wet & Forget Shower safely cleans natural stone* showers with no scrubbing required. … *Do not use Wet & Forget Shower on natural marble. When using Wet & Forget Shower on travertine, clean up any hard water stains or haziness on the surface before using the product here.