We swear by the CLR Bath & Kitchen Cleaner, which cleans stained grout quickly — and without bleach. Simply spray, let it set a few minutes, scrub, rinse, and you’ll see the grout whiten as it dries. It also dissolves soap scum and hard water stains on sinks, tubs, and shower doors.

Does CLR damage grout?

DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles.

Can you use CLR on tile?

(Formerly called CLR Bath & Kitchen) Use on most kitchen and bath surfaces including: porcelain, ceramic tile, shower doors, sinks, bathtubs, white grout & caulk, toilet bowls, fiberglass and kitchen countertops. Will not remove rust.

What is the best thing to use for cleaning grout?

  • Scrub dirty grout using plain warm water and a stiff-bristled brush. …
  • Spray with equal parts vinegar and warm water for several minutes. …
  • Apply a baking soda paste and spray with vinegar. …
  • Pour on some hydrogen peroxide. …
  • Apply oxygen bleach for up to 15 minutes. …
  • Try a commercial product.

How do you apply CLR to grout?

  1. Spray Directly on Stained Surface.
  2. Wait 10 minutes.
  3. Wipe thoroughly and completely.
  4. Rinse with Cold Water.
  5. Repeat as Needed.

Is vinegar better than CLR?

An acid-based cleaner is the best way to remove water deposits. Vinegar and lemon juice are two natural alternatives, but they just don’t work as quickly and effectively. CLR uses similar ingredients to Lime Away. … All you need to know is that they both are made specifically for water stains and break them down well.

What should you not use CLR on?

Do not use CLR on any natural stone or marble (including cultured marble), terrazzo, colored grout (any other color than white), any painted, coated, sealed or metallic glazed surfaces, plastics, laminates, Formica, Corian, aluminum, galvanized metals, nickel, oil rubbed bronze, brass, copper, steam irons, leaded …

Does Magic Eraser work on grout?

Finding a good grout cleaner can be tough. … Clean’s best way to clean grout is with the Mr. Clean Magic Eraser Bath with Gain Original Scent. Bursting with the fresh scent of Febreze® Meadows & Rain, it’s powerful enough to knock out even the most-stubborn buildup on grout throughout your bathroom.

How do professionals clean grout?

Q: What do professionals use to clean grout? A: whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.

How do I get my grout white again?

Mix 2 parts baking soda and 1 part bleach to make a thick paste. Spread this paste onto the dirty grout and wait 5 to 10 minutes. Scrub the grout using a stiff-bristled brush, then wait another 5 to 10 minutes. Once the time is up, rinse the paste off using water.

Article first time published on

What happens if you leave CLR on too long?

Don’t leave CLR for longer than two minutes. Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.

Does CLR really work?

5.0 out of 5 stars Great for Rust and Calcium buildup. … It actually works well on rust and lime stains. Even like naval jelly on cars or faucets, etc. it is very strong so be careful when using on porcelain or cheap stainless steel.

Can I use CLR in shower?

CLR® Brilliant Bath is about the only cleaner you need to keep your bathroom clean and for cleaning your shower doors. … Just make sure you do not use our cleaner on vinyl, marble, mirrors, plastic laminates, wood, fabrics, painted surfaces, colored grout or wall coverings.

How do I clean my shower with CLR?

  1. Mix CLR Calcium, Lime & Rust Remover with water in a large, clean bowl. …
  2. Hold the bowl so that the showerhead is completely submerged.
  3. Let the showerhead soak for 2–3 minutes.
  4. Use an old toothbrush to scrub away the heavy crust.
  5. Rinse the bowl and refill with cold water.

Can you use CLR to clean bathroom?

Scrub More than the Tub What’s great about CLR Brilliant Bath is that it’s not just for bathtubs. This multipurpose, multi-surface cleaner takes on calcium, lime, soap buildup and dirt on sinks, showers, toilets, tiles, chrome fixtures and stainless steel. It’s the right product for any bath or kitchen cleaning task.

Can CLR be used in toilet bowls?

How To Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR® Calcium, Lime & Rust Remover helps you flush the filth away.

Does CLR have bleach?

CLR PB-CMM-6 mold and mildew stain remover comes in a 32 oz. bottle with a trigger spray handle and is suitable for use on tile and grout, fabrics, painted walls, fiberglass and hard plastics, and other surfaces. … This mold and mildew stain remover is free of bleach.

Does CLR clean concrete?

CLR will remove rust stain from cemented surfaces, but you should first do a spot test to check for adverse reactions. Never use CLR on colored, sealed, stamped, or sealed concrete surfaces. Since CLR is a calcium remover, there’s a risk of pulling pigment and discoloring the concrete.

Does CLR expire?

How long is the shelf life of CLR? We recommend using or disposing of CLR within 3 years. Make sure cap is securely fastened after each use.

How do you make CLR paste?

Mix together 30% CLR, 10% vinegar, 20% Dawn dishwashing soap, and 40% water for a liquid cleanser, or forget the water, and mix in cornstarch for something more of a paste. Be careful when applying the paste, and be sure that you are wearing rubber gloves and you have proper ventilation.

Can muriatic acid be used to clean grout?

Cleaning Tile and Grout with Muriatic Acid Muriatic acid is a chemical that’s used for industrial purposes, pool cleaning, and more. It’s a powerful acid that can be used to clean stubborn surface stains, but it shouldn’t be used for tile and grout.

Does OxiClean clean grout?

OxiClean is an eco-friendly grout cleaning solution. … Unlike chlorine bleach that may discolor the grout, OxiClean will clean, sanitize and remove stains without harming the grout. Furthermore, OxiClean is environmentally friendly unlike more harsh products commonly used to clean grout.

Is bleach bad for grout?

We highly advise against using ammonia or bleach to clean any grout. Cleaning solutions that contain bleach or ammonia will not only work to erode your grout over time, they will cause your grout to become even dirtier by leaving a film behind, which attracts dirt.

Why is grout turning orange?

Soap scum, which appears orange, white, gray or even yellow in color, is the result of soap residue and hard water deposits building on the surface of the tile grout. When you notice the soap scum stains, clean them as soon as possible to prevent mold and mildew from growing.

Why has my grout dried patchy?

A: Blotchy grout is a relatively common issue. There are a number of reasons for it, but the primary cause for differences in the shading of colored grout joints throughout an installation is usually uneven curing. … The faster curing grout joints will be lighter in color than grout that cures more slowly.

How do you clean grout without damaging it?

Mix a thin paste of hydrogen peroxide and baking soda, apply it to the grout, wait 10 minutes then scrub with a toothbrush, wiped clean with a damp cloth. Baking soda is mildly abrasive so it helps remove the dirt that is stuck in the porous grout surfaces without causing any damage.

What does Mrs Hinch use to clean grout?

One of the most common responses was to use a product called Mould Magic. “Mould Magic is fabulous,” said one user. They added: “I treated two fully-tiled bathrooms. “It’s like a gel so you squirt it along the grout and leave for a couple of hours then wipe away.

Can CLR go down the drain?

Plumber in a Can CLR Clog-Free Drain clears almost all household clogged or sluggish drains in seconds! It is safe to use on all sound plumbing and works on almost any clog including hair, grease, food, soap build-up and more.

What is the main ingredient in CLR?

The main ingredients in CLR are water, gluconic acid, citric acid, lactic acid, surfactants, glycolic acid and sulfamic acid. These ingredients are all designed to eliminate the rust, calcium, and lime that build up on surfaces. Certain acids help with certain issues of each problem of calcium, lime and rust.

Does CLR clean mold?

CLR Mold and Mildew Clear allows you to quickly remove tough surface mold and mildew stains on a wide variety of surfaces and household items – no scrubbing required!

Does CLR clean hard water?

Ajax can be used on any surface that doesn’t scratch easily and can stand up to tough cleansers. Ajax in a sink, either porcelain or stainless steel, can remove hard water stains, discoloration from toothpaste and dye from foods, such as tomato-based sauces or turmeric.