Turn on your Bluetooth device.Power on Block Rocker. … Press and release the Bluetooth button to start pairing to your device. … Navigate to your Bluetooth device’s setup screen, find “Block Rocker” and connect.

Why isn't My Block Rocker Bluetooth working?

My Bluetooth device sees the Block Rocker but is unable to connect to it. … In your device’s Bluetooth settings, select the ION SPEAKER and choose “Forget Device”. On the front of the Block Rocker Bluetooth, press the Disconnect button. After turning the unit off and on again you should be able to pair your device.

How do I make my ion speaker discoverable?

  1. Power on both ION Audio Rock Speakers. Simultaneously press the Link button on both of them. …
  2. Next, one one of the Rock Speakers only, enter Bluetooth Mode by tapping the Bluetooth button. …
  3. On your Bluetooth-capable device, locate the ION Audio Rock Speaker in the Bluetooth settings and choose to pair to it.

Does Ion Block Rocker have Bluetooth?

The Convenience of Bluetooth! Easily connect your Bluetooth-enabled device to the ION Audio Block Rocker. You can use the Block Rocker App to control Play/Pause, Next/Previous Track options, plus EQ and sound effects.

How do I pair my ion Rocker Bluetooth?

  1. Turn on Job Rocker using the power switch.
  2. Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.
  3. If your device requires a passcode or PIN, enter “0000”. …
  4. If your Bluetooth device is not able to connect to Job Rocker, press the Bluetooth Disconnect button on.

Can you connect two block rocker plus?

Block Rocker Plus does not feature the ability to pair with another speaker. You can, however, use a Y-split 3.5mm > 3.5mm TRS jack cable from the headphone output on your phone into the aux input on 2x Block Rocker Sport speakers to achieve a wider sound.

How do you connect Bluetooth to ion job Rocker Plus?

Navigate to your Bluetooth device’s setup screen, find Block Rocker Plus and connect. The Bluetooth icon will be lit solid when paired. Note: If your Bluetooth device prompts you for a pairing code, enter “0000“. To disconnect pairing, press and release the Bluetooth button.

Why is my ion speaker not connecting to Bluetooth?

Reset the Bluetooth on your ION Portable Speaker If your speaker will not appear in your phone/tablets Bluetooth menu as an available device or is unable to pair, this could simply mean that the speaker is connected to or searching for another device.

Can you play USB on ion speaker?

The USB port on the front of the speaker is for charging your devices only. It will not play audio from a USB drive.

How do I reset my Ion Bluetooth speaker?

In your device’s Bluetooth settings, select the ION SPEAKER and choose “Forget Device”. On the front of the Explorer Bluetooth, press the Disconnect button. After turning the unit off and on again you should be able to pair your device.

Article first time published on

How do I connect my Bluetooth speaker to my phone?

  1. Open the Settings app.
  2. Navigate to Connected devices, and turn on the Bluetooth toggle switch, if it’s not enabled.
  3. Select Bluetooth to view the options.
  4. Select Pair new device to place the Bluetooth device in pairing mode.

How do I connect my ion speaker to another ion speaker?

Power on both ION Audio Rock Speakers. Simultaneously press the Link button on both of them. It may take up to two minutes for the Rock Speakers to pair together. You will hear various tones as they search and the tones will begin to change as the Rock Speakers find each other and pair together.

Why won't my party rocker connect?

If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break previous Bluetooth connections and reset the Bluetooth module. Navigate to your Bluetooth device’s setup screen, find the Block Rocker Bluetooth and connect.

How do you connect the party rocker app?

Power on the Party Rocker Express. Press the Bluetooth button on the Party Rocker Express to begin searching for your Bluetooth device. Navigate to Settings > Bluetooth settings on your phone to find, select, and connect to the Party Rocker Express. You’re ready to play!

How do I turn on my rocker Max Bluetooth?

Press and release the Bluetooth button to start pairing to your device. The Bluetooth icon will start flashing. Navigate to your Bluetooth device’s setup screen, find “Block Rocker” and connect. Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

Why isnt my ion Speaker charging?

If you’re experiencing reduced battery life or difficulty charging the battery in your ION portable speaker, it’s possible that the battery may need to be replaced. To simplify the process, most of our speakers with rechargeable lead-acid batteries feature a removable panel to easily access the battery compartment.

How do you link ions in Pathfinder 4?

To put the Pathfinder 4 into Bluetooth pairing mode, simply tap the Bluetooth button. The Bluetooth light on the display will begin to blink, confirming that it is ready to pair. On your Bluetooth device, search your Bluetooth list for the Pathfinder 4, and tap the name to successfully connect your device.

Is the ION job rocker waterproof?

It’s IPX4 water-resistant, so you don’t have to run and hide from a few raindrops. It streams music wirelessly from any Bluetooth®-enabled device, so you can play all your favorite music.

How do you connect two ion block rockers?

  1. Power on each Block Rocker. …
  2. If necessary, disconnect previous Bluetooth connections by holding down the Bluetooth button for 3 seconds.
  3. Press and release the Link button on each Block Rocker.

How do I pair my Pathfinder ion speakers?

Linking Two Speakers Power on Pathfinder™ 280˚ and the other compatible ION speaker. Press and hold the Link button to enter Stereo Link mode. Once a link has been established, the word LINK will appear in the display. Note: It may take up to 1 minute to make the connection.

How do I play music on ion?

Turn on Sound Center. Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect. The PAIRED LED on Sound Center will illuminate when your Bluetooth device is connected.

Who makes ion electronics?

ION Audio is a privately held consumer electronics manufacturer based in Cumberland, Rhode Island, United States and is part of inMusic Brands. The company was founded in 2002 to provide easy-to-use audio products at an affordable price, making them accessible to more consumers than ever before.

How do stadiums connect to Bluetooth?

Turn on your Bluetooth device. Power on Stadium and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth icon is off. Navigate to your Bluetooth device’s setup screen, find “Stadium” and connect.

How do I know if my ion speaker is charging?

8. Display: Displays the current radio station, battery status, and Bluetooth status. Charging Indicator: When the power cable is connected, movement of the top battery segment shows the battery is charging. When fully charged, all battery segments will be lit without blinking.

How long does it take for ion speaker to charge?

Fully charge the battery before using the speaker, charging time will take between 4 – 6 hours.

How do I play music from my phone to my ion speaker?

  1. First, download the ION Sound XP app from your mobile device’s app store.
  2. Navigate to your Bluetooth control panel and select your speaker to begin Bluetooth pairing. …
  3. Begin streaming audio from your streaming service of choice.

How do I turn on Bluetooth speaker?

Go to settings in your phone (both Android and iOS) and select the Bluetooth settings option. Scroll down to the other devices section under Bluetooth settings. Make sure your phone is in discoverable mode as well. Under ‘other devices’ select the speaker you want to pair and click on it.

How do I pair my ion Explorer speaker?

  1. Press and hold the Play/Pause/Link button on both speakers to enter Stereo Link mode. …
  2. Once the two speakers are linked, press and release the Bluetooth button on either speaker to begin the Bluetooth pairing process. …
  3. Navigate to your Bluetooth device’s setup screen, find Explorer Extreme, and connect.

How do you connect two ion PA speakers together?

Yes! Use an XLR cable to connect the Mix OUT of the main speaker to the XLR In on the second speaker. The second speaker will receive the same signal as the first speaker. Use the Aux Input Volume knob to set the level of the second speaker.

How do I reset my Bluetooth module?

Press and hold the Shift + Option keys on your Mac’s keyboard and click the Bluetooth symbol in the top-right corner of the macOS menu bar. Locate the revealed Debug submenu and hover your mouse cursor over it.

Why is my phone not connecting to my Bluetooth speaker?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.