How do I reset my vivint smart thermostat

From the Home screen, press and hold the SIDE button for three (3) seconds.Press DOWN to highlight Installer, then press the SIDE button.Press DOWN to highlight Reset, then press the SIDE button.Press DOWN to highlight Reset, then press the SIDE button.

How do I know if my vivint thermostat is working?

Press the button on the right to select Start. The Vivint Smart Thermostat will run a test to make sure that your HVAC, heating or cooling system is working with the Element commands. The screen will display the time that the test has been running, the active wires, and the temperature change.

How do I setup my vivint thermostat?

1. Tap the thermostat icon on the bottom navigation bar of your Vivint Smart Home app.
2. Tap the settings icon in the top right corner. …
3. Select Schedule preferences to adjust the temperature settings for weekdays and weekends. …
4. Adjust the schedule as desired.

How do I test my vivint thermostat?

1. Press and hold the side button down for 6 to 10 seconds until the settings menu displays.
2. Use the up and down arrows to highlight User and tap the button on the right to select it.
3. Use the up and down arrows to highlight Testing and tap the button on the right to select it.

How do I connect my vivint thermostat to WiFi?

1. Tap on the Menu icon.
2. Tap on Device Settings.
3. Tap on the panel you want to connect to WiFi.
4. Tap on the Wi-Fi line.
5. Connect your panel to WiFi. Tap on the WiFi network you want to connect your panel to, and enter in the password.

How do I set the temperature on my Vivint thermostat?

1. Tap the Temperature icon from the bottom menu.
2. Adjust the temperature by tapping the plus or minus icons or by sliding the heat or cool temperatures around the circle.

How do I reset my Vivint thermostat?

Factory Reset Press DOWN to highlight Reset, then press the SIDE button. Press DOWN to highlight Reset, then press the SIDE button. To confirm that you want to reset the device to factory defaults, press DOWN to highlight Reset, then press the SIDE button. The device resets itself and reboots.

What is the installer code for Vivint?

2203 is the default installer code on the Vivint security system.

Can I use Vivint thermostat without service?

Can I use Vivint without a subscription? You can use Vivint equipment without a subscription, but you wouldn’t have the benefit of professional monitoring, couldn’t access the mobile application, and won’t be able to use the 24/7 technical support service.

How do I turn my Vivint fan off?

1. From the home screen of the Vivint Smart Hub, tap the Temperature display icon from the bottom menu bar. …
2. The mode and fan settings will be displayed in the bottom left corner. …
3. The mode can be set to off, heat, cool, or auto.

Article first time published on

How do I add a thermostat to my Vivint panel?

1. Go to your touchscreen panel and touch the home button.
2. Tap Services.
3. Tap the wrench icon.
4. Enter your 4-digit PIN.
5. Tap Add Devices.
6. At this point, go to the device you want to add (door lock, thermostats, light module, etc.).

Can I lock my vivint thermostat?

Sure, you can control your thermostat with your phone. But when it’s part of a Vivint, you can integrate it with other smart home devices. … With one-touch leaving, pressing the lock button on your smart lock will automatically adjust your temperature to conserve energy while you’re away.

Why is my vivint app not working?

Log out of your mobile app and log back in. … If your connection is good, but it isn’t working, delete and reinstall your app. If neither the app nor the account center is working, go to your panel and send a command to your door locks, thermostats, or lighting modules directly from the panel.

Why is my Vivint panel offline?

Several issues can cause your panel to lose the connection to your home WiFi network. A passing storm may have knocked your power and network offline. An Internet outage in the area could have caused the WiFi to go out. … Find out how to test your WiFi to determine if you should contact Vivint or your ISP.

How do I set my Vivint thermostat to emergency heat?

1. Press the button on the right once to bring up the mode options.
2. Use the up and down arrows to select ‘E-Heat. ‘ This option will only be available if your system has a heat pump or auxiliary heat option.

Is Vivint connected to WiFi?

It is important to remember that your Vivint cameras run off of your home wifi network. If you have changed your wifi password or installed a new router, you will need to reconnect the panel to internet so that your cameras can connect. Your Vivint cameras are also dependent on your home wifi speeds.

What does mode mean on a thermostat?

The thermostat has an “On” and “Auto” mode setting for the fans inside your HVAC unit. When the fan setting is in On mode, it will constantly run and condition your home or office with either cool or warm air. This means that even if it gets too cold or too hot, the AC will keep on running 24/7.

How do you calibrate a thermostat?

Checking a Thermostat’s Calibration Checking the calibration of your thermostat is easy and should be done once a year, typically in the fall. To do so, locate your home’s thermostat and tape an accurate thermometer on the wall next to it. Wait 15 minutes and check the temperature reading on both devices.

Why does my thermostat says cycle delay?

Each thermostat model has a different display message when a delay occurs. This delay can be up to five minutes under normal operating conditions. A delay is used to protect your heating and cooling equipment from coming on too quickly (known as short cycling), which can cause damage.

How do I change my vivint thermostat to Celsius?

1. From the home screen of the Smart Hub, tap the Menu icon in the bottom right corner.
2. Tap General and enter your 4-digit PIN.
3. Scroll down and use the toggle to switch between F and C.

How do I remove the thermostat from my Vivint app?

1. From the Nest App home screen, tap the Settings gear in the upper right corner.
2. Tap Works with Nest.
3. Tap Remove all connections.
4. Tap Remove connection.
5. Tap REMOVE.

How do I reset my Vivint panel?

Hardware: Press and hold the Reset button on the back of the router for 10-15 seconds, then release. Software: In the Configuration Interface, go to the Advanced tab and under the Administration tab click Factory Defaults. Then click the Restore Factory Defaults button.

How do I turn off Vivint alarm without code?

To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.

Has Vivint been hacked?

Vivint works hard to ensure that all their devices are secure. They use 1024-bit encryption, and you can hide the IP addresses of connected devices. … Vivint was also successfully hacked by the cybersecurity researcher named Logan Lamb in a test on the vulnerability of many top-rated security systems.

How do I add Z-wave to Vivint?

At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node. Turn on the physical light switch.

How do I reset my Vivint Smart Hub pin?

1. From the home screen of the Smart Hub, tap the Menu icon in the bottom right corner.
2. Tap Users and enter 4-digit PIN.
3. Tap the User to edit and change admin rights, PIN, lock access, email and phone number, and send invites for remote access.

Is Vivint compatible with Z-Wave?

Vivint works well with Z-Wave.

How do I sync my vivint and Nest thermostat?

1. From the Vivint app home screen tap the 3-line menu icon in the upper left corner.
2. Tap Works with Vivint and then Google Nest. …
3. Tap Authorize Google Nest.
4. Sign in to your Google Nest account.

How much is the vivint element thermostat?

ThermostatPriceMonitoring feeVivint Element Smart Thermostat$169.00YesNest Thermostat$219.00NoEcobee4$246.51NoHoney Lyric T5$124.99Yes

Does vivint thermostat require C wire?

The Vivint Smart Thermostat should use the C wire for uninterrupted power when available. It can also use 4 AA batteries.

What is the swing vivint?

A thermostat works by turning your heating or cooling system on and off whenever the room temperature varies a certain number of degrees from the set-point. This variation is called “swing.” We recommend setting #1 which provides maximum comfort.