Install eave drip edge by nailing it to the sheathing.Extend drip edge an inch at each end.Install roofing felt.Install rake drip edge over the felt.Nail every 12” or less. … Rake drip edge overlaps the eave drip edge.Bend eave drip edge corners under rake edge.

How do you install a drip edge on a slanted roof?

  1. Install eave drip edge by nailing it to the sheathing.
  2. Extend drip edge an inch at each end.
  3. Install roofing felt.
  4. Install rake drip edge over the felt.
  5. Nail every 12” or less. …
  6. Rake drip edge overlaps the eave drip edge.
  7. Bend eave drip edge corners under rake edge.

Where should you start when installing drip edge?

Install roof drip edge along the eaves, add underlayment, then place drip edge along the gable end. The best way is to install the roof drip edge only along the eaves first, then place ice-and-water barrier (in the snowbelt) or felt paper (underlayment) over the drip edge.

How do you transition a gambrel shingle roof?

Place a shingle in position on the upper, working edge of your roofing job, so that it extends past the lower pitch’s edge. Holding the shingle in place with your knees, bend it over the edge of the pitch to sit flat on the upper pitch. Nail it into place. Release the shingle with your knees.

Should drip edge be tight to fascia?

A vertical drip edge lip extends down roughly 1 5/8″ and as Steve points out, should not be set tight against the fascia board or water may run behind the gutter and down the fascia, inviting leaks and rot.

How long does a gambrel roof last?

5. It provides a structure with a long-lasting result. When contractors use the correct materials when building a gambrel roof, then it can last for several decades when it receives regular maintenance. Most can last for well over a century before there is a need to start thinking about refurbishment.

Is a drip edge necessary on a roof?

Without a drip edge, water may end up beneath the shingles and may cause damage to various parts of the home. Though your home may not have originally had a drip edge installed, drip edges are now required by most building codes across North America to protect homes from damage.

Does drip edge go over or under felt?

Does Drip Edge Go Over or Under Felt? According to most building codes and manufacturer recommendations, the drip edge should be installed beneath the underlayment along the eaves of the roof.

Can you bend asphalt shingles?

Laminated architectural shingles should, preferably, not be bent over the roof ridge or hips. Only stack a few bundles high, so there’s no risk of them toppling over.

Should gutters go behind drip edge?

It is recommended that gutters are placed under or ‘behind’ the drip edge of your roof. … If gutters are installed below the drip edge, water can drip behind the gutter and cause damage to the wood supporting the gutter system.

Article first time published on

How far should shingles hang over drip edge?

Shingles should not extend more than 3/4” (19 mm) past the drip edge. If shingles overhang the edge of the roof by more than 3/4” (19 mm), then they are not supported and may crack and break off.

Can you replace drip edge without removing shingles?

The drip edge is often replaced when new shingles are installed, but it can be replaced at any time. Asphalt roof shingles can become brittle in cold weather, so wait until a warm (but not hot) day to remove and replace eave stripping.

Can you install drip edge after shingles?

Can Drip Edge Be Installed After Shingles? The most popular time to install a drip edge is when new shingles are installed. However, the drip edge can be installed at any time. The materials involved include: a ladder, a flat pry bar, a hammer, tin snips, eave stripping, and galvanized roofing nails.

Can you face nail drip edge?

Not really. The whole idea of attaching drip edge by nailing into the roof sheathing from above, is to avoid providing a pathway for water to reach the wood underneath. Face nailing with regular nails will work themselves lose and provide that path. There are times it can not be avoided.

How much does it cost to install drip edge?

The standard drip edge used (aluminum) is going to be around $2.00 a linear foot, including labor to install. If you upgrade to a different metal (steel or copper), it’s going to cost even more.

What color should roof drip edge be?

The most common colors for drip edge are white and brown. However, some roofing companies can provide color match drip edge. The color is often chosen to match the shingles or the gutters to create a seamless look. The color can also be chosen to match the shutters or trim of the house and act as an accent color.

What are 3 disadvantages of a gambrel roof?

  • Exhibits poor resistance to snow puddling. The flatter side of the gambrel roof is not made for snow puddling, and it shows. …
  • Prone to uneven wear. …
  • It is not retrofitting friendly. …
  • It is more vulnerable to wind gusts. …
  • It requires waterproofing. …
  • Some designs have ventilation issues.

Is a gambrel roof more expensive?

Danny Looper, a commercial sales manager for Lowe’s, in Cookeville, TN, notes that “a gambrel roof costs between 15 and 20 percent more than a gable roof.” This means that, if it will cost $10,000 to build a gable roof, it will cost between $11,500 and $12,000 to build a gambrel roof for the same building.

Can shingles be stored outside?

No matter where you store them, keep them off the ground. Not only will this protect them from water damage, but it will help with air circulation around the shingles. If they must be stored outside for a period of time, cover them with a waterproof tarp.

How many layer of shingles can you put on a roof?

Most building codes allow up to two layers of organic or fiberglass asphalt shingles. That limit pertains to roofs with up to a 4:12 pitch. When it’s time to replace your roof, there are several factors that might lead your roofing professional to recommend adding shingles on top of your existing layers.

How Long Can shingles sit on roof?

Dimensional shingles come with a 30-year manufacturer warranty. Vented properly and installed correctly, you should get around 80-85% of the life span out of an asphalt roof. That means you can expect to get about 20-22 years out of your 3-tab shingle roof and 25-28 years out of your dimensional shingles.

Does drip edge go under tar paper?

The drip edge should be over the paper at the eaves, and under along the rake. mroberson: Its a TRAP! Back in my construction days, I learned that you place the tar paper OVER the drip edge on the eaves so if moisture gets through the shingles, it does not get under the drip edge.

What nails do you use for drip edge?

The drip edge is nailed in place using 1-1/2 galvanized roofing nails. A felt-tip marker works great for marking cuts. And, again, prying open the end with a small flat bar allows the pieces to overlap cleanly.

How far below drip edge should gutters be installed?

  1. The gutter should be installed 2 to 3 inches from the roof.
  2. Gutters should stick out from the edge of the building and beyond the siding.
  3. The back of the gutter should rest on a drip edge.
  4. Failing to install gutters properly can lead to costly problems.

Does drip edge go on rakes and eaves?

A drip edge should be installed on the eaves and rakes of the roof, flush with the decking and fascia. On eaves, the drip edge is installed directly to the deck with underlayment installed over it for proper water shedding. On rakes, the underlayment is installed over the drip edge.

Do you need to remove the plastic strip on shingles?

The GAF shingle application instructions for our entire product line specifically state that that film does not need to be removed. Note: The film strips on the back of each shingle are to prevent sticking together of the shingles while in the bundle. Their removal is NOT required during application.