How do you lubricate a pop up camper lift system?
Lube each pulley with a dry lube like silicone spray (there are a few in the lift posts also). Lower the top all the way and remove the whiffle tree cover (by the crank) clean all the old dirt and grease off, re-lube with a heavy grease of your choice.
How do you troubleshoot a Coleman camper?
Open the fuse box and look for any fuses popped out from the housings. There are 10-, 15- and 35-watt fuses in the panel. Replace the fuse with the proper size if needed. Push all fuses back into the proper housings in the fuse box. Test all lights, radio or TV, water heater and AC, and test all outlets by plugging in an electric device.
Why does my Coleman popup camper roof not lower?
The bolt is the Wiffle Tree and the nut is the carriage pulling the cables. When you turn the crank handle you are turning the large bolt and the nut is pulling the cables. Pretty simple. Where mistakes seem to happen is folks don’t know that if you crank a nut down on a bolt it is really hard to get off. We have all been there.
What should I do about my Coleman pop up?
Here you can find manuals and guides for a wide range of repairs and upgrades to Coleman and Fleetwood pop ups.
Where can I get pop up camper parts?
Hanna RV & Trailer Supply carries a wide selection of pop up camper products, including the lift system parts you need to update or repair your camper. From electric lift kits and motorized winches to the cables and components you need, we have it all.
Open the fuse box and look for any fuses popped out from the housings. There are 10-, 15- and 35-watt fuses in the panel. Replace the fuse with the proper size if needed. Push all fuses back into the proper housings in the fuse box. Test all lights, radio or TV, water heater and AC, and test all outlets by plugging in an electric device.
The bolt is the Wiffle Tree and the nut is the carriage pulling the cables. When you turn the crank handle you are turning the large bolt and the nut is pulling the cables. Pretty simple. Where mistakes seem to happen is folks don’t know that if you crank a nut down on a bolt it is really hard to get off. We have all been there.
Here you can find manuals and guides for a wide range of repairs and upgrades to Coleman and Fleetwood pop ups.
How does a pop up camper trailer work?
Slow and steadily use the cranking mechanism to perfectly align your camper with the ground. It is important to remember that these mechanisms can be tricky so, take your time with this step. Once your camper is level and stabilized, you can now start placing the jacks under the support points of your trailer.
