You can revive a dry air plant by soaking it in water for 5-8 hours. Shake off any extra water after the soak and let your air plant dry within 4 hours of watering. Repeat the long soaking every 2-3 days until the plant does not look dry anymore.

How do you bring an air plant back to life?

The easiest way to accomplish this is to soak the entire plant in a bowl or bucket of lukewarm water. You may need to tie the plant to a heavy object to keep it from floating to the top of the water. Place the bowl in a warm location and let it soak for 12 hours.

Is my air plant dehydrated?

Although air plants like Xerographica don’t need much water to survive, not getting enough would cause dehydration and they will begin to show signs like; looking a bit dull, the tips of the leaves are drying out, and are starting to make a u-shape and get droopy at the same time.

Why is my air plant drying out?

Signs of not enough water include curling leaves, and drying tips, while signs of too much watering could be some browning (rotting) on the bottom base of the plant. … Let your plant fully dry before placing it back in its usual spot. From there try adding in an extra soaking or some mistings into your watering routine.

Where do you put air plants?

Air plants do best with at least a few hours of bright, indirect sun daily. Placement within 1 to 3 feet of an east- or west-facing window, or within a foot or two of an artificial light source is ideal. If you keep them well watered, they can have hotter, more direct sun and longer exposure.

Is Epsom salt good for air plants?

Epsom salt is safe and a natural choice if you do not wish to use commercial fertilizer. Just mix about 2-5g (pharmaceutical grade) to 1 litre of water and spray on your airplants weekly. The “special” result you can achieve with airplant is the ability to break dormancy.

How often should I soak my air plant?

Soak your air plants in a bowl of water for 20 minutes to an hour every week to 10 days is best. Submerge the entire plant. If your plant has a bloom, you may wish to keep the bud above the water to not disturb it, although in nature they get wet all the time.

How do you know if air plants need water?

You’ll begin to notice that after watering, your plant’s leaves will feel stiffer and full of water and they’ll be softer and lighter in color when they’re in need of water. Wrinkled or rolled leaves can be a sign of dehydration.

How do you reverse air plant rot?

When an air plant is dying of rot, it all comes down to watering, or more specifically, drainage. Air plants need to be watered by either misting or soaking in water, but they do not like to stay wet. Once the plant has been soaked or misted, it needs to be allowed to dry.

What is the lifespan of an air plant?

Tillandsias, commonly known as air plants, are perennial plants. This means that they typically live for more than two years (source), with their lifespan ranging between 2 to 5 years.

Article first time published on

How do you get air plants to bloom?

Submerge entire plant in room temperature water for 5-10 minutes once or twice a week. Let plants drain upside-down on a towel after their bath for at least 3 hours so they are dry to the touch. Fertilize every 2 months with epiphytic/bromeliad/non-urea nitrogen fertilizer for better blooms and daughter growth (pups).

What is the best fertilizer for air plants?

Low-nitrogen fertilizers are best for air plants because it helps encourage blooming and offset production in Tillandsia. It’s also very important to use a non-urea-based nitrogen fertilizer, as this will provide nitrogen that is usable for Tillandsia.

Can air plants live in sand?

> You don’t need soil for your air plants to thrive, so no need to include it here. In fact the majority of air plants should NOT be planted in soil. You can easily layer moss, sand, or rock to create variation and texture in your terrarium.

Should air plants be in direct sunlight?

ost air plants do not do well with direct or full sun. Because they require indirect light, air plants make great office plants as long as they get some light, either indirectly from a window source, or artificially from full spectrum fluorescent lights.

Can you use Miracle Grow on air plants?

Fertilizing Tillandsia Use a fertilizer specifically formulated for bromeliads or air plants once a month, or dilute Miracle-Grow or similar water soluble plant foods to 1/4 strength. Add the fertilizer water to a spray bottle, and mist thoroughly with the food water once a month.

Do plants like salt?

Plants, like people, need a certain amount of salt to survive, but too much can be poisonous. Most plants can tolerate saltwater on their leaves and stems, but they will dehydrate if they drink saltwater from the soil. … The takeaway is to avoid watering your plants with saltwater if you want them to thrive.

Is table salt good for plants?

Table Salt. Table salt is sodium chloride. … Plants are very sensitive to sodium and so adding table salt to the garden will kill plants. Some use it to kill weeds, but the same sodium that kills weeds, will spread through the soil and kill many other plants, and for this reason it is a poor choice as a herbicide.

How do I give my plants magnesium?

Providing magnesium for plants begins with annual applications of rich, organic compost. Compost conserves moisture and helps keep nutrients form leaching out during heavy rainfall. Organic compost is also rich in magnesium and will provide an abundant source for plants.

What does rot look like on an air plant?

Identifying Rot If the base of your air plant looks brown and feels overly soft/mushy to the touch, it might be the victim of rot or fungus. Often times a rotting air plant will also lose leaves around its base and could start to fall apart, or the center of the air plant might come out.

How do I know if my air plant is overwatered?

Overwatering – more air plants die from overwatering than under watering. The tell tale sign is that your air plant looks brown at the bottom, and it’s and slimy.

What should a healthy air plant look like?

Tip: Watch your plants’ leaves for clues on whether they are thirsty or not. Curly leaves are drier and a healthy white fuzz actually means your plant is healthy, not necessarily drying out. Brown leaf tips and a general shriveled appearance are other clues you are under-watering.

Can you soak an air plant for too long?

If the flower is wet for a prolonged period of time, it can cause rot, which in turn could cause rot to take over the leaves and kill the plant. Remember, it is better to underwater slightly rather than overwater your air plants.

Can I soak my air plants overnight?

If your air plant is ever looking ‘thirsty’ or like it’s struggling, you can soak them in water (in a bowl or sink) for several hours or overnight. This can often help to revive your tillandsia. When watering your tillandsia, rainwater or pond water are best.

Do air plants have babies?

On average, air plants will create 1 to 3 pups after the blooming process. Some varieties can product many, many more. Separating Pups from the mother plant: You can gently remove offsets from the mother plant when they grow to be about 1/3 the size of the mother.

Is it OK to hot glue air plants?

Apply glue at the base of your air plants, avoiding the leaves altogether. Hot glue gun: Hot glue is not preferable to the plant-safe glue above because it’s not waterproof and simply won’t be as durable, but it’s an acceptable method in a pinch.

How do you make air plants grow bigger?

If you want to give your plants an extra boost, you can fertilize them once a month in addition to regular waterings, which will encourage faster growth, blooming, and pup formation. Take a look at and purchase our specially formulated Tillandsia fertilizer to promote your air plant’s growth!

Can air plant be propagated?

How to Propagate Air Plants. The easiest way to propagate your air plant is to remove offsets, or pups, that grow from the base of the mother plant. One to three pups will appear after the plant’s bloom cycle.

How do you make air plant food?

  1. Get a handful of fresh, moist moss having a vibrant green color. …
  2. Ensure that it has a few live strands attached to it.
  3. Chop it finely, reducing it to a texture that resembles a granular fertilizer.
  4. Combine 80% of the moss to 20% of a blood meal and put in a ziplock, plastic bag.

Can air plants survive in a bathroom?

Air Plant or Tillandsia makes great bathroom plants because they can soak up the humidity. … To keep your air plants happy and healthy, place them in a spot with bright, indirect light and high humidity. Make sure to provide proper air circulation since this is how they absorb nutrients and water.

What kind of water do you use for air plants?

Air plants aren’t too picky when it comes to water, and most tap water is just fine, but it depends on the water quality in your area. The best water to use: rain water, aquarium water, or pond water because these are more rich in nutrients (note: if using one of these waters, don’t add any additional fertilizer).

Should I mist my air plants?

In order to thrive, air plants need bright, indirect light. … This means that if you’re putting your air plant where it will receive loads of light, you should plan to mist it more often – twice a week or even daily.