Automatic modulation of the clutch allows riders to ride a taller gear through corners. The rear brake can be applied fully without fear of stalling. Ease of operation allows the rider to focus more on their line.

What are the benefits of a Rekluse clutch?

Automatic modulation of the clutch allows riders to ride a taller gear through corners. The rear brake can be applied fully without fear of stalling. Ease of operation allows the rider to focus more on their line.

Is a Rekluse clutch a slipper clutch?

The Hinson BTL is a slipper clutch and the Rekluse z-Start is an automatic clutch. In essence a slipper clutch is basically a handling device.

How do you shift a Rekluse clutch?

To begin moving, let the clutch lever out and simply twist the throttle. Upshift gears as you normally would using the clutch lever as you shift. Your Rekluse auto clutch engages during normal riding from idle to 1,800 RPM. While cruising, keep the RPM at or above 2,500 RPM to keep the clutch from slipping.

Can you wheelie with a Rekluse clutch?

It reacts pretty much the same way you’d expect a normal clutched-bike would to any given situation. You can spin the rear wheel, pull wheelies, dump the clutch to get instant drive etc in exactly the same way as you would with a conventional clutch.

Where are rekluse clutches made?

Rekluse clutches are proudly made in Idaho, USA. Watch to learn more about our awesome manufacturing team and facility.

Can you bump start a Rekluse clutch?

All Rekluse Auto Clutches can be configured to bump-start the engine in the event your normal starting system fails. … One must stop the motorcycle and make an adjustment to bump start and then make another adjustment to continue riding once the engine fires. Bump-starting can be done to get you home.

Is a Rekluse clutch good for motocross?

I can see no disadvantage to using a Rekluse in motocross. You can still use the clutch as manual for starts, you will hook up and have better traction off the start and thru turns. You will nearly never stall. You will not have to use the clutch lever at all, creating less arm pump.

Do Supercross riders use Rekluse clutches?

Record numbers of riders are using Rekluse Auto and Standard Clutches in Supercross.

How does an auto clutch work?

When the clutch pedal is pressed, a cable or hydraulic piston pushes on the release fork. … As the middle of the diaphragm spring is pushed in, a series of pins near the outside of the spring causes the spring to pull the pressure plate away from the clutch disc. This releases the clutch from the spinning engine.

Article first time published on

How does a Hinson slipper clutch work?

A slipper clutch is basically two clutches in one. The first clutch is activated by the clutch lever. The second clutch is activated by centrifugal force within the spinning clutch basket. When the clutch’s internal moving parts decelerate, the difference in momentum disengages the clutch.

What is a Endo motorcycle?

The stoppie is a motorcycle and bicycle trick in which the back wheel is lifted by abruptly applying the front brake, then, by carefully reducing the brake pressure, the bike is ridden for a short distance on the front wheel. It is also called an endo, or less commonly, a front wheelie.

What kind of oil does rekluse clutch suggest?

Rekluse recommends the diesel engine oils as they are designed to work under higher long term temperature and stress loads than the average car oil which is what the average guy uses in his bike. A rekluse can and will do nasty things to oil if allowed to slip excessively.

Do Hard Enduro riders use rekluse?

No , the best pros don’t use rekluse in extreme events (Romaniacs, Erzberg, Roof of Africa) , maybe they use rekluse clutch cover because you can put +50ml oil and helps cooling the clutch components + they are sponsored by rekluse.

What are the different Rekluse clutches?

  • RadiusCX is the Taj Mahal of automatic clutch systems, featuring a plethora of Rekluse’s latest technologies. …
  • RadiusX is the little brother to the RadiusCX.

How do I know what Rekluse clutch I have?

the easiest way is to start it up, and click it into gear without pulling the clutch in. if it continues to idle then it has a rekluse.

How much oil does a Rekluse clutch take?

Transmission oil is, according to the manual, 0.71 qt’s (671 cc’s) total after draining, or 0.79 qt’s (747 cc’s) after disassembly. Add ten to that and, with the cover, you should use 681 cc’s after draining, or 757 cc’s after disassembly.

Do Supercross racers use clutch?

Shifting gears in supercross races is similar to shifting gears in motocross. … You may not notice racers shift gears, but that’s typically because they won’t use their clutches. A rider with a lot of experience will know which gear they prefer to use, depending on the specific track that they are riding on.

How much is a rekluse auto clutch?

The Rekluse RadiusX is Rekluse’s performance automatic clutch available for $849 MSRP. Benefits Just Shift, Twist, and Go Free your clutch hand with the Rekluse automatic-clutch. Come to a complete stop in gear and accelerate without touching the clutch lever.

Can you put an auto clutch on any motorcycle?

The EFM Auto Clutch is a automatic pressure plate designed to work with ANY TYPE OF BIKE. The EFM Auto Clutch allows the rider to take off and stop simply by using the throttle and with out touching the clutch lever.

At what point is the clutch actually wearing?

The clutch only wears while the clutch disc and the flywheel are spinning at different speeds. When they are locked together, the friction material is held tightly against the flywheel, and they spin in sync. It’s only when the clutch disc is slipping against the flywheel that wearing occurs.

Can you press the clutch and accelerator at the same time?

There’s no need to actually “release” the clutch and press the accelerator at the same time.. If you are on a flat surface, you can just release the clutch enough to start the car moving, and then keep your clutch pedal at that point. In just a moment, the clutch will finish engaging all it’s itself.

What happens when you shift gears?

In theory, changing gears is about using the engine’s power in different ways to match changing driving conditions. The driver uses the gearshift to make the engine generate more force or more speed depending on whether hill-climbing power, acceleration from a standstill, or pure speed is needed.

What's better Hinson or rekluse clutch?

The only difference we both felt was that the Rekluse had a little more bite (or pop/excitement) out of corners than the Hinson. The Hinson had slightly less bottom end hit than the Rekluse, but had slightly better rear wheel traction.

Is slipper clutch necessary?

Why you need a slipper clutch? Basically, race-track motorcycles use it as it helps to gain faster lap times. The rider can easily coordinate the speed and braking without losing traction. But considering the safety of the rider at high speeds, many manufacturers today have widely adopted the slipper clutch.

What is the difference between quick shifter and slipper clutch?

A slipper clutch eliminates this scenario by allowing aggressive downshifting by allowing the clutch to slip if the rear tire is running at a higher speed than the engine. A quick shifter allows the rider to makes gear changes without disengaging the clutch.

Whats the difference between an endo and a stoppie?

An Endo is when the bike comes to a complete stop on the front wheel. But a true “STOPPIE” is more like this video. This is also referred to as a nose wheelie or nose manual. or this on a motorcycle: 137mp stoppie!

What is a Stopy?

Stopy belongs to the class of antinauseants drugs. Especially this drug is used to treat nausea and vomiting of pregnancy. … Stopy is used to treat nausea and vomiting in pregnancy, Hyperemesis gravidarum, Motion sickness, Sea sickness.