Installing a backsplash in your kitchen costs an average of $1,000. You could pay as little as $600 or as much as $1,350. Your local tile contractor could charge you a minimum fee of $160 for labor, or add $10 per square foot to your material estimate. If not, they may quote you roughly $40 to $60 per hour for labor.

How much does it cost to retile a kitchen splashback?

COST: Expect to pay anywhere between $45 and $250 per square metre for the tiles only, depending on the material the tiles are made from, the colour or pattern, the size of the tile, plus the adhesive and grout. A tiler will charge you approximately $400 to tile a kitchen splashback in an average size kitchen.

How much does it cost to install a 40 sq ft backsplash?

Backsplash installation costs an average of $15 to $40 per square foot. For professional installation, the average total cost is about $1,000.

How much does Home Depot charge to install tile backsplash?

The average cost of backsplash installation is around $800 for the average 25 sq.ft. backsplash. Larger walls are priced separately.

Why is backsplash so expensive?

A high-quality tile costs more than average because it’s made from expensive materials, looks better, and often offers better durability and easier maintenance. Always factor in the cost of contractor labor and shipping before selecting tile for your kitchen or bathroom renovation.

What is cheaper splashback or tiles?

Is a Splashback Cheaper Than Tiles? … An acrylic splashback is very inexpensive, but tiles are still cheaper. However, if you’re planning on tiling the entire wall instead of just the area behind your sink then acrylic would be cheaper.

How much does it cost to change a splashback?

You can expect to pay anywhere from $450 to $900 for kitchen splashback installation cost, depending on the complexity of your job and the number of cut-outs you splashback requires. Cut-outs are mainly for power points and will cost anywhere from $50 each or more depending on the material.

How much is labor for tile?

Labor Cost to Install Tile The labor cost for installing tiles is about $4 to $32 per square foot. Labor costs range from $4 to $14 per square foot for floor tiling, while those for a backsplash or countertop are about $25 to $32 per square foot.

How much should I pay for backsplash installation?

Installing a backsplash in your kitchen costs an average of $1,000. You could pay as little as $600 or as much as $1,350. Your local tile contractor could charge you a minimum fee of $160 for labor, or add $10 per square foot to your material estimate. If not, they may quote you roughly $40 to $60 per hour for labor.

Can I install backsplash on drywall?

As long as your wall is smooth and flat, you can install a ceramic tile kitchen backsplash directly over drywall or plaster with no problem. Start by cleaning the wall to remove any grease, then apply thin-set adhesive, and set the tile.

Article first time published on

What is the average square footage of a kitchen backsplash?

The average backsplash is roughly 30 square feet and can be made of nearly any material. With varying material costs, this can lead to large price ranges for the project.

Can I put new backsplash over old backsplash?

Can you put new tile over a tile backsplash? Yes, in theory, but you’re not going to get great results. Doing this would lead to an overly thick backsplash. That’s if you can get the new tile to adhere to the old tile.

How much is subway tile per square foot?

Standard subway tile costs around $2-$3 per square foot; the beveled edge variety costs around $4 per square foot.

How do I calculate how much tile I need for a backsplash?

Multiply the width and height to find the total area in inches, then divide by 144 to find the amount of square feet needed (amount of inches in a square foot). For example, if your space is 48″ (width) x 18″ (height) = 864. 864/144 = 6 square feet. Be sure to measure every area that needs tile and add them together!

What is the most expensive backsplash?

Glass. Glass is one of the most expensive kitchen backsplash materials out there. The cost of glass is between $7 and $30 per square foot, and the installation cost of a glass backsplash is around $32 per square foot. Installing a glass backsplash needs a high budget as it can get quite expensive.

How do I remove an old splashback?

  1. Use your wire cheese cutter to slice through the silicone sealant that attaches the splashback to the wall. …
  2. Once you reach the middle of the splashback, you can go to the opposite corner and repeat the process.
  3. When the two cuts meet, use your chisel to slowly lever the splashback off the wall.

Can you paint splashback?

An easy and affordable way to give your kitchen a fresh, new look without the cost of removing your tile splashback is to paint it. You can paint it the colour of your choice or create a new design.

Can I put a splashback over tiles?

Splashbacks can be installed over existing tiles, providing they’re securely attached to the wall and there are no cracks or broken tiles which might impact the adhesion of the panel. … Any exposed tile edges can then be finished with silicone or finishing trims.

What Colour Splashback should I get?

Choose colours that are either similar tones to your benchtop for a more consistent look, or colours that are complementary or contrasting if you want to add interest. This light-coloured tiled splashback is a nice contrast to the darker benchtop, however by choosing similar tones, the look is tied together.

Do I need a splashback if I have tiles?

Without a kitchen splashback or tiles to protect your painted or wallpapered wall, then it’s at risk of being stained, damaged, and ruined.

Where do I start tiling a backsplash?

  1. The Center: some people prefer to begin their tile work in the center of the wall. This enables you to work your way outward in rows, to keep the lines symmetrical and even. …
  2. From a Focal Point: When working with intricate patterns, beginning at a focal point tends to draw the eye in.

How do you prep a wall for a backsplash?

Patch any holes or cracks with spackling compound and sand the entire surface with medium-grit sandpaper. Vacuum to remove dust. Remove any remaining dust, oils and grease from the wall with TSP (tri-sodium phosphate) or an ammonia-based cleanser. Let the wall dry completely before beginning tile installation.

Can you tile directly onto a painted wall?

“Painted surfaces are generally unsuitable for tiling; a detailed examination of the painted surface should be made to decide whether it is suitable. Emulsion paint, lime-wash, distemper and similar finishes should be removed since they can possess poor adhesion to backing. Solvent based adhesives should not be used”.

What is the most popular kitchen backsplash?

Ceramic tile is the most popular option for kitchen backsplash. Ceramic tiles are incredibly versatile—they come in many shapes, sizes and colors and can be installed in numerous patterns.

How much does quartz backsplash cost?

On average, both quartz and marble slab backsplashes will cost an average of $90 per square foot. A granite backsplash will cost an average of $50 per square foot but can range up to $75 per square foot.

What is a standard backsplash height?

Standard Backsplash Height In general, the backsplash is installed to the height of four inches from the surface of the countertop. These backsplashes can be of any material or color, but we suggest that it compliments the cabinets and the countertops. … There is no need to conform to four inches pattern.

Can I replace backsplash without replacing countertops?

You physically have to remove the current countertops without breaking the tile backsplash. Most people don’t additional tile left by the previous owner or the person who did the original tile work. Therefore, something breaks in the wrong spot, you’re pretty much screwed and you have to replace the whole thing.

How can I update my kitchen tiles without removing them?

With decorative panels. Forget redo kitchen backsplash, painting the tiles or tile stickers. The best option to cover ceramic tiles withour removing them is not peel and stick backsplash over existing but decorative panels, easy to install, cheap and beautiful.

What is subway tile?

Subway tile gets its name from the look of the tiles in the New York City subway system, though those early tiles were actually made of white glass. Subway tile is by definition a rectangular, thick, low-fired, glazed ceramic tile, traditionally 3″ by 6″, though it comes in a variety of sizes for home use.

How much does 12x12 tile cover?

For clarification, (1) 12×12 tile covers 1 square foot. And the term “12×12” actually refers to the length and width of the tile in inches. So a 12×12 tile is 12 inches in length by 12 inches in width.

How much does it cost to install backsplash per square foot?

How much does it cost to install a tile backsplash? Tile backsplash installation can cost between $10 and $40 per square foot, and the national average cost is $445. However, homeowners may pay more than $1,000 to install backsplash, while others may pay several hundred dollars.