How to reset Duo therm Comfort Control?
Duo-Therm Comfort Control Reset
- Turn the device on and the light and annunciator data are there.
- Press the mode button to activate the annunciator light.
- Then, at the same time, press the up and down buttons and hold.
How does duo-therm comfort control thermostat work?
Have a Duo-therm comfort control thermostat (5 button) with 2 air conditioners and a furnace. Have not used the ac for a while. Zone 1 I turned on the ac set the temperature and the ac came on as normal. When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit.
What are the buttons on a duo therm?
It has a 4-button Duo Therm Comfort Control Center that operates the A/Cs, heat strips and furnace. If you have one of these you probably have had problems with the buttons from time to time. To change zones you have to mash down both the FAN and MODE buttons at the same time.
What does Zone 2 mean on duo thermostat?
When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit. I then reset the thermostat per manual by turning thermostat off, holding down zone and mode buttons and then turning the thermostat on. When the thermostat rebooted only zone 1 is now available.
How does a comfort control thermostat work?
Plus, the system allows for different temperature settings for each heating or cooling unit, if desired. When you install a new comfort control thermostat you have to turn it off, hold down mode and zone buttons and turn it on while still holding down mode and zone.
Have a Duo-therm comfort control thermostat (5 button) with 2 air conditioners and a furnace. Have not used the ac for a while. Zone 1 I turned on the ac set the temperature and the ac came on as normal. When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit.
It has a 4-button Duo Therm Comfort Control Center that operates the A/Cs, heat strips and furnace. If you have one of these you probably have had problems with the buttons from time to time. To change zones you have to mash down both the FAN and MODE buttons at the same time.
Why is my Dometic duo thermostat not working?
But such is not the case and here are some common Duo-Therm thermostat problems and their solutions: 1. The thermostat won’t stay on or turn on – the first place to look will be your on/off switch. If there is a crack in the solder making the connection, then no power will be sent to the switch.
When I changed to zone 2 there was no display except for the “2” indicating zone 2, also the backlight was lit. I then reset the thermostat per manual by turning thermostat off, holding down zone and mode buttons and then turning the thermostat on. When the thermostat rebooted only zone 1 is now available.
