POB – Point of Beginning.

What does POB stand for?

POBPlace of Birth Governmental » US Government — and more…Rate it:POBPrevention Of Blindness Medical » PreventionRate it:POBPhysicians Office Building Medical » PhysiologyRate it:POBP O Box Miscellaneous » UnclassifiedRate it:POBPoint of BankingTM Business » BankingRate it:

What does true point of beginning mean?

The Point of Beginning is a surveyor’s mark at the beginning location for the wide-scale surveying of land. A surveyor begins at a well-known landmark, such as the center point of a street intersection.

What does CP mean in surveying?

Frequently in surveying engineering and geodetic science, control points (CP) are setting/observing distance and direction (bearings, angles, azimuths, and elevation).

What is POB DOB?

The dob pob is a writable document needed to be submitted to the specific address in order to provide some info. It has to be completed and signed, which can be done in hard copy, or with the help of a particular solution such as PDFfiller. … Just amend the ready document.

What are chaining pins used for?

Chaining pins are used when measuring a distance with a survey chain. Two people are needed for the measurement. The leader starts with nine chaining pins and one end of the chain. He stretches the chain toward the destination, whilst the follower holds the other end at the point of beginning.

What is a POB real estate?

A metes-and-bounds land description always begins and ends at a point of beginning (POB). The point of beginning is also referred to as the point of commencement (POC). From the point of beginning, the border of the property is described until the point of beginning is reached again.

What does SS mean in surveying?

RANCHOSAGUA HEDIONDAAGUA HEDR/WRIGHT OF WAYSSSIDE SHOTSSOUTH

What does PC mean on a survey stake?

PC Point of Curvature. The point where a curve begins. Pile of Stones A heap of stones used to mark a property corner or sometimes. placed at intervals along property lines.

What do surveyors use as a starting point?

In surveying, an initial point is a datum (a specific point on the surface of the earth) that marks the beginning point for a cadastral survey. The initial point establishes a local geographic coordinate system for the surveys that refer to that point.

Article first time published on

What type of legal description uses monuments?

A metes and bounds legal description starts from a point of beginning, then traces the outline of the property’s boundary lines until there is closure in the legal description. Natural monuments and artificial monuments can both be used as metes and bounds. For example, rivers, roads, trees, etc.

What is Principal Meridian in real estate?

A Principal Meridian is one of the prime meridians used in the government rectangular survey method of land description to locate range lines. … A principal meridian is a meridian line accurately laid out to serve as the reference meridian in land survey.

What does a land surveyor produce?

Land surveyors do a variety of tasks such as updating boundary lines and preparing sites for construction so legal disputes can be prevented. They produce plats of surveys and describe property. Land surveyors are involved with measuring properties and pieces of land to determine boundaries.

What is datum in real estate?

A horizontal plane from which heights and depths are measured.

What is chaining pins in surveying?

Chaining pins, or taping pins, are used to mark tape lengths on the ground as a survey crew moves along. They are also a handy means to temporarily mark any point.

What are the instruments used in surveying?

  • Alidade.
  • Alidade table.
  • Cosmolabe.
  • Dioptra.
  • Dumpy level.
  • Engineer’s chain.
  • Geodimeter.
  • Graphometer.

What is ranging pole in surveying?

Ranging poles (see Fig. 7) are used to mark areas and to set out straight lines on the field. They are also used to mark points which must be seen from a distance, in which case a flag may be attached to improve the visibility. Ranging poles are straight round stalks, 3 to 4 cm thick and about 2 m long.

How do I find survey pins?

Survey pins are typically 15 feet in from the curb. Go to your front curb and measure back about 15 feet in the area you think your marker should be. Use a metal detector and then start digging. The marker should be about 6-10 inches below the surface.

What is the difference between a plat and a survey?

A survey will show any dwellings, buildings or improvements (driveways, fences, pools) located on the property; A plat usually shows the dimensions of the property before the improvements are made. … A plat will often cover more than one lot or parcel of land.

What is in an ALTA survey?

The ALTA Survey is a detailed land parcel map, showing all existing improvements of the property, utilities, and significant observations within the insured estate. The survey also details the licensed surveyor’s findings concerning the property boundaries and how they relate to the title.

Under what circumstances does a legal land description not return to its point of beginning POB?

A legal description that does not return to the point of beginning (POB) is defective.

What is a datum in a legal description?

What is a datum in a legal description? A code indicating the date and time that a survey is recorded. An area measurement included in a plat survey. A standard form for recording a plat survey.

What is the legal definition of a monument?

Primary tabs. A monument is a written document or record. A monument may also be a permanent landmark that indicates boundaries and corners of land; a natural or artificial permanent fixture in land that is referred to in a legal description of the land.

Where are principal meridians?

Meridians are imaginary lines of longitude on the earth that extend from the North to South Pole. A principal meridian is one which is used as a reference line to survey a large area.

How far apart are principal meridians?

The division is done by placing monuments along the principal meridian at intervals of 24 miles from the initial point. Standard parallels (also called correction lines) are run east and west from the principal meridian.

What is the most important meridian?

The Prime Meridian is the most important line of longitude. It is located at zero degrees longitude (0˚). The Prime Meridian runs through Greenwich, a place near London.

What is a location survey?

Location survey establishes all corners and property lines of the subject property, to include finding or setting monuments.

What are the branches of land surveying?

  • Geodetic surveys.
  • Topographic surveys.
  • Hydrographic surveys.
  • Cadastral surveys.
  • Engineering surveys.

How are land surveys conducted?

All property surveys begin with research into legal descriptions about the land they‘ll be surveying and its history. Then, the surveyor will actually go out to the property and sketch out the land, its boundaries, and different elements that make up your property. This is called the fieldwork.

When surveying land a surveyor refers to the principal meridian that is?

Points of beginning. When surveying land, a surveyor refers to the principal meridian that is. within the rectangular survey system area in which the land being surveyed is located.

What is air lot in real estate?

Air Lot is a designated air space over a designated piece of land. As with surface property, an air lot may be transferred.