Rift sawn lumber is typically narrow with a very straight grain pattern on the face of the board. Rift sawn lumber is usually used with oak to avoid the flecks that are common in the species. … Similar to quarter sawn lumber, rift sawn lumber is also referred to as radial grain.

What is better rift sawn or quarter sawn?

Due to the position of the growth rings in the cut, Quarter Sawn lumber is more dimensionally stable than Plain Sawn. It resists expansion and contraction on plank’s width. Rift Sawn lumber is the most elite of the cuts.

Is rift sawn white oak more expensive?

Rift sawn White Oak boards take longer to cut and use less of the tree, so they tend to be more expensive. Quartersawn boards are somewhat less costly, as the cutting technique is less involved and more of the wood is used. Plainsawn boards are the least expensive.

What is the difference between quarter sawn and rift sawn oak?

Quartersawn lumber will have straight, uniform grain on two sides—the top and the bottom. Rift-sawn lumber will have that same straight, uniform grain on the top and bottom, but will also have nice parallel grain on the two edges.

What is the advantage of rift sawn?

Rift Sawn Advantages: Produces the strongest possible boards with the most consistent visual look of long and straight grain patterns. Generally the choice of cut for fine furniture makers looking for consistent patterns throughout their design. These are the most common ways to mill a log into flooring planks.

Are rift sawn oak cabinets expensive?

Rift-sawn and Quarter-sawn oak are a subtler version of plain-sawn oak. However, these more popular variations are much more expensive than the traditional oak cabinet.

What does rift wood mean?

Rift sawn lumber is typically narrow with a very straight grain pattern on the face of the board. … Similar to quarter sawn lumber, rift sawn lumber is also referred to as radial grain. The most stable boards, and also the most wasteful to produce, are rift sawn planks.

Is quarter cut and rift cut the same?

Rift sawn lumber, also known as straight grain, is cut at the sawmill with the grains intersecting the face of the board at an angle between 30 and 60 degrees and quarter sawn lumber is cut with the grains intersecting the face board the board at an angle between 60 and 90 degrees.

Is rift sawn or quarter sawn more expensive?

Rift and/or Quarter Sawn is a premium cut and is generally more expensive than Plain Sawn. It is also considered more stable because of the vertical grain orientation.

What is rift and quarter?

Rift and Quartered Sawn Logs are cut with the grains intersecting the face of the board at an approximate 60-degree angle. The log is sawn into four quarters and each quarter of the log is sawn perpendicular to the growth rings at an angle, therefore being named rift and quartered.

Article first time published on

What is a disadvantage of rift sawn lumber?

Cons to Rift Sawn Lumber Cost: Because it is so labor-intensive, rift-sawn wood costs more than quarter-sawn or plain-sawn lumber. Waste: Rift-sawn wood produces the most wood waste of the three methods, which is another reason that it’s more expensive.

What does rift cut white oak look like?

Rift-Sawn White Oak is similar to Quarter-Sawn, but with the angle of the cut changed slightly so that fewer saw cuts are parallel to the medullary rays, which are responsible for the flake effect. … Rift-Sawn lumber produces an almost straight grain with practically no flake figure.

What is rift oak cabinets?

WHAT IS RIFT CUT SAWN LUMBER? Rift cut sawn lumber or radial grain is specially cut to circumvent the ray flecks that are common in the Oak Wood species, resulting in a finer and more linear grain than standard oak.

What is the strongest cut of wood?

RIFT SAWN ADVANTAGES Produces the strongest possible boards with the most consistent visual look of long and straight grain patterns. Generally the choice of cut for fine furniture makers looking for consistent patterns throughout their design.

What does Quartersawn guitar neck mean?

Some high-end guitars and basses have “quartersawn” necks. … “Quartersawn” is a woodworking term that describes a certain specific and non-standard method of milling lumber from trees. Quartersawn instrument necks are unusually strong, straight-grain necks superior to standard necks in almost every way.

What is Tiger Oak?

Tiger oak is lumber produced by a particular milling process called quarter sawing. The process results in lumber with a distinctive grain that is often used in high-end applications in which the appearance of the wood is an important consideration.

What is rift cut oak veneer?

Rift Cut is the process of slicing the veneer at a 15 degree angle to the radius of the log. This process produces straight, striped grain appearance without the flakes that appear in Quarter Sliced veneer. Red and White Oak are generally the species that are Rift sawn to avoid the flakey appearance.

How expensive are white oak cabinets?

Expect to pay between $1,500 and $4,000 for new oak kitchen cabinets. Depending on the hardware you select, and whether or not you have your cabinets professionally installed, the cost will vary.

What are quarter sawn oak cabinets?

Quarter-sawn means that the log is cut at a 45 degree angle to the radius of the rings. This creates a more consistent, tighter grain instead of the cathedral graining and adds Medullary rays or “flecking,” a feature unique to this wood species.

What is quarter sawn white oak?

Quarter Sawn White Oak is the same species as White Oak but the wood has been cut from the log at a different angle (quartered). It is more stable than standard (flat sawn) White Oak and has a finer texture with a dramatic flaking pattern that runs perpendicular to the grain.

Which hardwoods are the most stable?

Antique heart pine and American cherry are the most stable with respect to seasonal movement. Oak, walnut, and ash are average, but hickory and beech are the most unstable of domestic hardwood species.

What is Rift quartered white oak flooring?

Rift and Quartered White Oak contains both straight rift sawn grain and quarter sawn grain. There is naturally occurring fleck on a small percentage of this product that adds to the unique beauty of this highly sought after cut. Rift and Quartered White Oak is prized among wood aficionados all over the world.

Why is quarter sawn better?

Quarter-sawn wood is more stable than plain-sawn. Not only is it less prone to cupping, it also expands and contracts less. Quarter-sawn provides a “quieter” and straighter face grain than plain-sawn.

What are the disadvantages of quarter sawing?

More expensive than plain sawn material Quarter sawn wood is more expensive because it is more labor intensive to produce and the manufacturing process produces more waste than plain sawn lumber.

Is Tiger oak and quarter sawn oak the same?

According to Hunker, tiger oak is lumber made through a specific method of milling called quarter sawing that results in distinctive grain lumber used in high-end applications. … However, quarter sawn oak strictly refers to tiger oak. The difference in plain sawing and quarter sawing is the angle used.

What is rift sawn white oak cabinets?

White Oak is mostly straight-grained with a medium to coarse texture. Rift-sawn lumber is produced by quartering the log then sawing it perpendicular to the growth rings. This method of sawing accentuates the straight, vertical grain.

How do you bleach white oak cabinets?

Bleaching Kitchen Cabinets Apply the bleach with a sponge across the surface of the wood. Wipe down the wood as if you were cleaning it, making sure you do not use too much or too little bleach. Putting more bleach in some spots than others will result in spotting or streaking, which does not create a uniform look.

What wood is the rarest?

Agar Wood. Agarwood is famous for the tea, oil, and perfume that it produces. It’s hefty price tag is thanks to its incredibly high demand and extreme rarity – it’s one of the rarest trees in the world.