Lutron Caséta uses the Clear Connect RF communications protocol. This uses an entirely different frequency (434 MHz) from both Wi-Fi and 2.4 Gigahertz alternatives like ZigBee. The biggest reason for this change is to operate on a little-used frequency which gives users a better experience.

What technology does Lutron Caseta use?

The Caséta Wireless Plug-In Lamp Dimmer uses Lutron patented Clear Connect RF Technology which enables wireless communication with Pico remote controls, Caséta motion sensors, and the Lutron Smart Bridge and Smart Bridge Pro.

Do Lutron switches work with Zwave?

Is Lutron Caséta Compatible with Z-Wave? Lutron’s home site does not indicate it is compatible with Z-wave technology. However, you CAN run them concurrently, but with different bridges or hubs, if you choose to do so.

How do Lutron Caseta communicate?

Overview of the Lutron Caseta Wireless System. … The system communicates using the proprietary Lutron Clear Connect protocol. Clear Connect is a wireless technology that works in the low-use 434 MHz frequency band to communicate with individual control devices. It also uses Wi-Fi to connect to other systems, like Nest.

Does ZigBee work with Lutron Caseta?

Lutron Caseta isn’t compatible with Z-Wave or ZigBee smart hubs because it operates on a different radio frequency. Instead, it uses its own mesh network protocol to connect to a dedicated hub.

Can I use Lutron without bridge?

Do I need to have a Smart Bridge to use Caséta products? Caséta dimmers & switches are able to communicate directly to Lutron Pico remotes and do not require a bridge or wifi to function.

Is Caseta a ZigBee?

Lutron Caséta uses the Clear Connect RF communications protocol. This uses an entirely different frequency (434 MHz) from both Wi-Fi and 2.4 Gigahertz alternatives like ZigBee. The biggest reason for this change is to operate on a little-used frequency which gives users a better experience.

What does a LUT MLC do?

The LUT-MLC load adapter is provided to help ensure proper operation of the switch with LED, CFL, fluorescent, and ELV lighting loads. When controlling one of these load types, a LUT-MLC may be required, especially at lower wattages.

Does Lutron Caseta need neutral wire?

The Lutron Caseta Bridge skips the need for a neutral wire. Part of the need for a neutral wire is keeping your smart switch powered on all day and all night. This is required for keeping your smart switch connected with your smart environment and the internet.

What's better ZigBee or Z-Wave?

ZigBee operates at 2.4 GHz compared to the 908 MHz of Z-Wave. The higher frequency allows ZigBee to transmit more data but reduces the range of the signal. … A Z-Wave signal between two nodes can travel up to 330 feet in an outdoor, unobstructed setting.

Article first time published on

Will Lutron Caseta work with SmartThings?

The Lutron Caseta In-Wall Dimming Switch. … That’ll let you use things like SmartThings-compatible motion detectors to trigger your Lutron gear. Lutron devices will work with SmartThings in 2017 — but you’ll still need the Lutron Bridge plugged into your router.

What is a Z-Wave switch?

Z-wave switches are one you can control your home lighting from your smart phone, Alexa, or Z-wave controller interface. The configuration options for your lighting are endless.

What hubs work with Caseta?

  • Ring. …
  • Samsung SmartThings. …
  • IFTTT (If This Then That) …
  • Yonomi. …
  • Logitech Harmony. …
  • XFINITY Home. …
  • AT&T Digital Life.

Does vivint work with Lutron?

While Vivint sells a plug-in device to control outlets, as well as Hue smart light bulbs, these devices stop working if an appliance’s switch (or the wall control) is inadvertently turned off. The solution is to replace your current light control with a smart switch from Lutron, Wink, or Wemo.

What hubs work with Lutron Caseta?

The Lutron Caseta SmartBridge Pro is typically around $80 on sale and it works with Amazon Alexa, Apple HomeKit, and Google Home. Note that to connect this bridge to your home network, you will need a wired ethernet connection, so you’ll want to consider placement and ports near an existing router.

What products use Z-Wave?

  • Garage Door.
  • Lighting Controls.
  • On/Off Outlets.
  • Remote Controls.
  • Smart Home Security Systems.
  • Smart Locks.
  • Smoke Detectors.
  • Thermostats.

Do you need ZigBee?

They’re necessary because the protocols you’re more familiar with, such as Wi-Fi and Bluetooth, are rubbish for meshing together a lot of low power devices spread all around your home. A better solution was required, and Zigbee – along with Z-Wave – is the answer.

How do I connect Lutron to Apple HomeKit?

  1. Download the newest version of the Apple iOS Lutron app.
  2. Go into Settings on the Lutron app.
  3. Click on “HomeKit & Siri”
  4. Click on “Add Home”
  5. Enter the code on the bottom of your Smart Bridge.
  6. Go back to Settings on the Lutron app.
  7. Click on “HomeKit & Siri”
  8. Click on “Rooms”

Does Caseta need a hub?

In Conclusion. While your Lutron Caseta doesn’t need a “hub” or bridge, having one gives you access to your light switch’s full suite of smart features. Getting a hub allows you to connect your device to the internet, putting the “smart” in “smart switch.”

Does Lutron Caseta work without wifi?

Yes, Lutron Caseta does work without the internet. You will need an internet connection for your initial setup, but after that the Lutron Caseta only requires that its bridge maintains connection to the power supply in order for the Lutron Caseta to function.

Does Lutron Caseta require a hub?

Since Caseta devices use Lutron’s proprietary Clear Connect RF wireless protocol, the hub is required in order to connect the switches to your network. This is pretty easy.

Does Caseta switch need neutral?

For example, Lutron Caseta devices do not use a neutral wire. Having to run a neutral wire to smart in-wall switches and dimmers can present problems for certain users. … No neutral wire is used when the power source enters a lighting fixture directly, and the switch itself is used to complete the circuit.

Can I use ground as neutral for Smart switch?

Can you use ground as a neutral for smart switches? … While connecting the neutral of a smart switch to ground might work, never do this! The reason it will work is that ground is often connected to neutral in the electrical panel, meaning it will be at a very similar voltage allowing current to flow from hot to ground.

What causes LED ghosting?

What causes LED bulb ghosting? In most cases, when you turn a standard dimmer off, the electronics inside do not receive any power. … This tiny bit of current can cause this bulb ghosting phenomenon. Most LEDs are now designed to ignore this small amount of current, but some are more sensitive than others.

Is Zigbee dead?

The short answer is no, the standard is far from dead and still receives a lot of updates from its creators. Many different standards can exist at the same time without putting one another entirely out of the game.

Is Alexa Zigbee or Z-Wave?

However, right now, Alexa is not quite powerful enough to truly stand alone, in the way SmartThings can. There’s the fact it only supports Zigbee (no Z-Wave), but even within this Alexa is limited in exactly how much control you can wield over your connected devices, and Routines are not always totally reliable.

Does Alexa support Z-Wave?

For example, Alexa can also be used to control Z-Wave, and the newer Alexa models no longer require the hub to bridge the two devices together. Plus, with these newer options, integration is a cinch, allowing Alexa to control Z-Wave effortlessly.

Does RA2 select work with Caseta?

Caseta and RA2 integrate with just about any third-party service and product you can think of, with few exceptions. Serena shades didn’t make the cut with RA2 Select, even though RA2 is an upgrade from Caseta.

Do you need the Lutron bridge with SmartThings?

A Samsung SmartThings hub and one or more sensors, along with a Caséta Smart Bridge, wireless lighting and Serena shades, are all you need to get the convenience, security and peace of mind from a smart connected home. You can then customize your control with a wide range of SmartThings monitors and devices.

How do I connect my Lutron Caseta to SmartThings?

  1. Plug in the Smart Bridge and connect it to the router.
  2. Download the Lutron app and follow the direction.
  3. Set up your Samsung SmartThings system and SmartThings app.
  4. Once both apps are setup, follow Samsung’s instructions to integrate the Caséta devices to SamrtThings. For steps in their app, click here .

Is Alexa a Z-Wave hub?

Alexa only “speaks” WiFi (and ZigBee if you have the EchoPlus). It currently doesn’t support Z-Wave, the protocol of choice for home automation thanks to its high speed and low interference with other connected devices in your home. That means you can’t have a Z-Wave switch or plug speak directly to your Echo.