The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.

How long does it take to fill a 30 ft pool?

The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.

How much water will it take to fill a 12x30 pool?

The pool is 30″ which is 30/12 == 2.5 feet, So the pool is 2.5 * 452 = 1130 cubic feet. Which is 1130 * 7.48 = 8452 gallons. 2 of 33 found this helpful.

How many gallons is a 12x30 Intex pool?

Measuring 12-Feet by 30-Inches and able to hold up to 1,718 gallons of water, this pool is the perfect size for any backyard fun.

Is it OK to fill a pool overnight?

Before adding any water to your pool, you should make sure that the pool is clean and free of any loose debris. If necessary, clean the pool so that you will have clean water right from the start. … It is never recommended to leave your home during this time or to fill your pool overnight.

How much chlorine do I put in a 12x30 pool?

Pool Size (Diameter x Depth)Capacity (Gallons)Chlorine Bleach (Oz / Cups)10′ x 30″1,08114oz / 1.75C12′ x 30″1,48519.5oz / 2.5C12′ x 36″1,77923oz / 3C15′ x 33″2,58733.5oz / 4.25C

How long does an Intex pool take to fill?

To fill an Intex Prism frame pool with water using a hose with a 44 GPM flow rate, it will approximately take anywhere between 27 minutes to 3 hours depending on the size of your round-shaped Prism Frame pool. For rectangular-shaped Prism frame pools, it might take more or less an hour to be filled with water.

Do I need to put chlorine in Intex pool?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.

How many gallons of water does it take to fill a 15x30 pool?

Standard In-Ground Pool Volumes in Gallons by Size15x3011,80013,50016×3213,40015,40018×3617,00019,40019×3819,00021,700

How many Litres is a 12ft Intex pool?

Intex 12 Ft Prim Metal Frame Swimming Pool With Water Filter, Capacity: 6503 Litres.

Article first time published on

How long does it take to fill a Quick Set pool?

The sides are held up by the water inside the pool. They are not inflated so they aren’t for sitting or resting on. If you do, it will push down and the water will flood out. It will take 2 – 3 hours to fill the pool with a hose.

How long does it take to fill a pool with a hose?

With a standard size 1/2 inch garden hose, it takes about 9 hours to fill a 5000-gallon pool. To figure the time needed yourself, multiple the number of gallons your pool holds by . 0018. The volume of water a standard hose can deliver per minute is approximately 9 gallons or 540 gallons in an hour.

How long does it take to fill up 1000 gallon pool?

At 100 gallons per hour, 100 hours. At 1,000 gallons per hour, 10 hours.

How can I fill my pool faster?

  1. #1. Garden hose using city water. The most straightforward way to fill inground swimming pools with water is to connect a garden hose to your outdoor spigot. …
  2. #2. Water delivery service. …
  3. #3. Well. …
  4. #4. Fire hydrant using city water.

What is the cheapest way to fill a pool with water?

  1. Your Water.
  2. Call the water company and tell them you are going to fill your swimming pool. …
  3. Run the hose to the pool with enough slack that the end of the hose is on the bottom of the pool.

How soon can you swim after filling pool?

How soon after filling a pool can you swim? After the pool is full it usually takes up to 1 week before the pool is ready for you to swim. The shortest timeline we have seen for swimming after filling a plaster pool is 5 days.

What month should I open my pool?

The month of March is the BEST time to open your swimming pool. If you wait any longer for the temperature to rise higher than 65 degrees algae and other organics will start to grow.

How soon can you swim in a new above ground pool?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

How long does it take to fill a 15 foot Intex pool?

Answer : 2-5 hours, depending on which pool, hose size and water pressure.

How long does it take a 18x48 pool to fill?

It takes nine hours to fill a 5,000-gallon pool at 540 gallons per hour.

How long does it take to fill a 15 foot round pool?

It would take 31.25 hours to fill a 15,000 gallon swimming pool if your water pressure is 8 gallons per minute and your outside water hose is 480 gallons per hour.

How long can water sit in pool without chlorine?

I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

Can you swim with chlorine tablets in pool?

Answer: Yes, when using tablets they can be present in the water while you swim. Also confirm with a test of the chlorine level to be sure the sanitizer level is safe for swimming.

How often do I add chlorine to my pool?

How often do you add chlorine to your pool? – Quora. Daily as needed and indicated by measurement. One caveat, however: if your total alkalinity and pH are not where they should be, you will find it difficult to keep enough free chlorine in your pool water. Adjust your alkalinity first, then correct your chlorine.

How many gallons is a 16x32 pool?

The pool is (apparently) 16 feet long by 32 feet wide = 512 square feet of surface area. But how deep is it? It takes about 7.48 gallons of water to fill one cubic foot. So if our 512 square foot pool is only one foot deep, it would take about 3,812 gallons of water to fill it.

How many gallons are in a 14ft by 42in pool?

Water capacity is 3,357 gallons (90%) and it is ready for water in 45 minutes.

How do you keep a pool clean without chemicals?

  1. Salt sanitizers (“saltwater pool”) In recent years, saltwater sanitizers have become a popular alternative to off-the-shelf chlorine for treating water in swimming pools. …
  2. Ozone pool purification. …
  3. Ultraviolet pool sanitizing light.

How do I keep my pool crystal clear?

  1. Maintain Chemical Levels. Maintaining proper chemical levels in your pool is the most important step in keeping the water crystal clear. …
  2. Administer Shock and Algaecide Weekly. …
  3. Backwash. …
  4. Skim Regularly.

How many gallons does a 12 x36 pool hold?

DiameterHeightGallons10′30″100012′30″150012′36″180015′36″2800

How much pool shock do I need?

Typically for granular shock, you’ll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn’t a one-size-fits-all answer.

How long does it take to fill a 5 000 gallon pool?

Fill It Up If you upgraded to a 5/8-inch-diameter hose delivering 17 gallons per minute or 1,020 gallons per hour, you could fill your 5,000-gallon pool in about five hours.